Here are some tips about how to maintain your hot tub and also a recommandation if you live in Colorado. Refer to your Owner’s Manual for sanitizers approved for use with your spa. DO NOT USE tri-chlor chlorine, any type of compressed bromine or chlorine, acid or any type of sanitizer not approved for your spa.
Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.
Advices for buying a hot tub : Acrylic is the most common spa shell material, but roto-cast polymer, vinyl and wood are also options. The spa shell not only determines the look of the hot tub, but also its cost, insulation, and strength. Considering a wooden hot tub? Read more about wood tubs before you take the plunge.
Vacuuming the spa can be accomplished with small vacuums that are either battery powered or garden hose powered. The Pool Blaster spa vacuums are battery operated and fast to use, or you can use the Grit Getter to suck up the little grains that gather in the corners. There are also spa vacs that connect to your vacuum hose for fast removal of even large leaves. Floating debris can be removed with a skimmer net. If you left the cover off during a windstorm and the spa is full of leaves, a skimmer net can also be used to scoop up the larger leaves under the water.
Tap water is pretty good spa water in most areas. But in some areas (and you know where you are), you can run into issues of soft or hard water, high alkalinity, pH imbalance, or high levels of chloramines, metals and minerals. You can test your tap water with your test kit, or when testing after a drain and refill, you can measure the suitability of your tap water as spa water. Using a spa pre-filter removes metals, odors and the finest silt from your spa fill water. Read extra info at Pro hot tub repair service in Colorado.