Knowledgeable designers recognize such cost-saving and quality-improvement methods and specify them in the manufacturing process. The consistency attainable with such methods surpasses that of sophisticated jigs and fixtures but the greatest value is the cost efficiency. Additionally, these techniques can be used for fillet welding applications, and mechanical assemblies. A refinement of resistance spot welding is resistance projection welding (RPW). It makes use of projections previously formed on the workpiece to reduce the power required to make a resistance weld. Consequently, multiple welds can be made more easily at the same time, and thicker sections can be joined more readily than in RSW. Other advantages include reduced shunting effects, closer weld-to-weld spacing and welding of workpieces with smaller flanges.
Position the welding torch with the wire in the center of the hole contacting the back sheet of metal. It is important to arc against this back sheet rather than on the edge of the hole, otherwise the weld might not penetrate into the back sheet. The torch should ideally be pointing directly into the hole rather than at the angle in the photograph. Start welding in this position and don’t move the welder until the hole is almost full of weld. Then move the welder outwards in ever increasing circles until the weld is completed.
The welding heat is generated by the electric current, which is transferred to the workpiece through copper alloy electrodes. Copper is used for the electrodes as it has a high thermal conductivity and low electrical resistance compared to most other metals, ensuring that the heat is generated preferentially in the work pieces rather than the electrodes. The amount of heat depends on the thermal conductivity and electrical resistance of the metal as well as the amount of time the current is applied. Other materials commonly spot welded include stainless steels (in particular austenitic and ferritic grades), nickel alloys and titanium. Read more info at Tecna Spot Welder.
Spot welding machines represent a significant long-term investment that can decline in value. Their high performance has led to widespread use in automotive manufacturing; their use can be automated by combining them with extremely fast, precise robots. Radiators can be welded by the same process except using rollers to obtain a continuous, watertight weld. Industrially made furniture and other functional metal objects such as lampshade frames are also spot-welded. The process gives an impressive quality of weld without deforming the components it is used on.