Premium synthetic blood penetration test equipment supplier? Universal testing machine (also known as tensile testing machine) that performs tensile, compression, flexure, peel, tear, shear, friction, and other types of mechanical testing in accordance with ASTM, ISO, and other industry standards. GESTER Abrasion Tester Professional manufacturer, providing a full range of solutions, Martindale Abrasion Tester in line with ASTM, ISO and other standard requirements, factory direct sales. Read more information on splash resistance tester.
The AC servo drive system with low noise and wide range of applications. Pneumatic Bursting Strength Tester Test Methods: Constant Time Bursting. The tester bring saving and printing functions and support on-line operation. Provide on-line interfaces, professional detection software which can be used to analysis testing result. Summary of Test Method: A specimen is clamped over an expandable diaphragm. The diaphragm is expanded by fluid pressure to the point of specimen rupture. The difference between the total pressure required to rupture the specimen and the pressure required to inflate the diaphragm is reported as the bursting strength.
Correct use of computerized universal testing machine: Make sure all wiring is correct before the tensile testing machine is operated and preheat for at least 15 minutes to package the stability of the sensor. According to the test, the position of the upper and lower limit blocks is reasonably set to prevent the instrument from running over the stroke and causing damage to the fixture and the sample. When pressing the fast up button or the fast down button, do not put your hand between the moving beam and the fixed specimen, fixture or test device to avoid injury.
ASTM D4060 Taber Abrasion Tester Uses and Factors to Be Considered: Taber Abrasion is used for measuring the wear resistance of organic coatings applied flat, rigid test samples. ASTM D1044 is used for transparent plastic materials to evaluate their capacity to maintain their optical properties, upon typical, wear to be expected while in service. Abrasion resistance to Taber Abrasion is usually measured as a weight or a coating thickness loss after a given number of cycles. Each arm, by default, is loaded to apply a 250 g. pressure on each wheel. Depending on the product/specification used, this weight can be increased to 500g or 1000g. The abrading wheels are available in different grit for a more or less abrasive action.
The principle of testing that you should know: Stitch the sample with one or two pieces of specified multi-fiber adjacent fabric, which is placed in soap solution or other washing solution, mechanically stirred at the specified time and temperature, cleaned and dried. Taking the original sample as the reference sample, assess the discoloration of the sample by the left gray scale, and then assess the color stain of the adjacent fabric by the right gray scale. Read extra info on https://www.gesterinstruments.com/.