Looking to purchase some top quality corrugated flexible conduit? Here are some advices and extra details helping you to make the best pick. Rigid polyvinyl chloride (PVC) is similar to plastic plumbing pipe and is installed with plastic fittings that are glued in place. It can be bent after being heated in a portable heater box. Because the conduit tubing and fittings are glued together, the conduit assemblies can be watertight, making PVC suitable for direct burial in the ground for many applications. It is also allowed in corrosive environments.
Flexible metal conduit is best known by its nickname “Greenfield,” for its inventor, Harry Greenfield. It is a spiraling metal tubing that bends easily and is commonly used for short, exposed runs in household circuits, such as connections for garbage disposers, hot water heaters and furnaces. FMC is suitable for dry locations only and must be supported every 4 1/2 feet and within 12 inches of each electrical box. It can be used as a ground path only with approved fittings and only where flexibility is not an issue after it is installed. For example, if it’s connected to a motor that vibrates, the conduit cannot be used for grounding.
Intermediate Metallic Conduit or IMC is lighter weight, metallic conduit and is rated as stronger than other rigid conduit. IMC was first produced by Allied Tube & Conduit. IMC, provided in both threaded IMC and non-threaded IMC forms, is a rigid metallic conduit tubing, typically hot-dipped galvanized steel or stainless steel. The interior of galvanized steel IMC is usually coated with an anti-corrosion layer. Threaded IMC is joined by threaded couplings, C condulets, sweeps and bends. The tubing is cut with a pipe cutter or tubing cutter, and then threads cut using a thread cutting tool. When cutting IMC, take care to remove burrs on the tubing interior that would otherwise damage electrical wires being pulled through the conduit. See even more info on https://www.corrugatedconduit.com/stainless-flexible-conduit.
The liquid tight flexible metal conduit (LFMC) is a versatile choice that is not only effective at protecting the wires from damage, but additionally gives reliable waterproof protection. As a way to offer the waterproofing protection, the conduit is coated by using a special jacket that only fits over the top of the the metal. This implies the LFMC great to make use of in any environment, including those areas which may experience difficulties with damp.
Below are some of the most commonly used cable conduit and applications, please note that there are more variants available. Flexible metallic conduit, formally known as FMC’s is a strong, hardwearing conduit that gives good protection, easy installation and is effortlessly flexible. Please note that this type of flexible conduit is not waterproof. Flexible metal conduit, this is a great solution for areas that include tight bends or when you need to position the conduit at an angle.
CorrugatedConduit.com offer a wide selection of corrugated plastic flexible conduit and flexible metal conduit to fit your needs. All of our flexible conduit meet ROHS, SGS specifications as durable and are resistant to low level acides and alkalis. These flexible conduit are also designed for wire and cable protection well. Here are you can find a full sizes of all kinds of plastic & metal flexible conduit. Whether your application requires plastic conduit, split conduit, metal conduit and other applications. You will find what you need here. Read even more info on https://corrugatedconduit.com/.