Stone coatings provider: Oil-based polyurethane has a slight amber or yellowish tint and can yellow even more over time, which adds a bit of rich, warm, amber color to the floors if that’s your goal. You’ll find it in high-gloss, semi-gloss, and satin sheens. This finish has a very strong odor and releases a high level of VOCs, so you’ll need to don a respirator to protect your lungs if you plan on finishing the floors yourself. You’ll also need to allow quite a bit more time for the project than with water-based polyurethane and clean up with mineral spirits rather than soap and water. Generally, it takes eight to 10 hours for each coat to dry (two to three coats total is the usual recommendation). After the last, you’ll need to wait at least 48 hours before walking on the floors in shoes and four days to fill the rooms with furniture once more.
In order to fully benefit from surface protective coatings, the coatings must have a strong bond with the surfaces that are applied. Without this bond, even the best coatings will fail to deliver its promise to adhere to the surface and provide protection. Liquiguard Technologies surface primers offer an effective and complete range of primer solutions for virtually any type of flooring.
Liquiguard Technologies has the best metal coating solutions designed to protect, maintain and extend the lifespan of a wide range of metals including aluminum, brass, bronze, chrome, pewter, cast iron, silver, stainless steel, etc. This unique line of eco-friendly, biodegradable coatings offer solutions to prevent tarnishing, oxidization, flash rust and corrosion, by repelling moisture, too. These water-based coatings are safe and easy to apply without releasing any toxins or fumes. And will maintain the look and feel of your metals without damaging the surfaces. Find additional info on Metal protective coating.
Thermal Shock. Temperature fluctuation or thermal shock is an important condition that must be considered. Thermal shock, such as steam cleaning of the floor surface, will cause a loss of bond from thermal expansion if the floor system is not chosen properly. The coefficient of expansion of most coating systems is much higher than for concrete and must be carefully considered when selecting a material. Once you have identified the degree of severity of the major areas of abuse, you must rank them in order of importance for the particular project. This will provide a major focus for what is needed in terms of material and applied thickness. The last of the material selection process is possibly the most important. It involves how the coating project is going to look aesthetically, how it’s to be applied, what the time frame for installing the system may be, and last, but certainly not least, what are the budget parameters.
LiquiGuard continues to not only refine and improve upon our existing line of products, but we’re constantly working to discover new solutions for an evolving marketplace. We work directly with manufacturers, distributors, resellers and consumers to develop effective and environmentally responsible solutions to their existing problems. As well as creating a safer, and more beautiful household and work environment. All of our products are made in the U.S.A. Discover additional details at here.