Quality transformer core factory supplier: Mumetal cores are highly specialized magnetic shielding materials that offer unparalleled performance in reducing electromagnetic interference. These cores are made from a unique alloy of nickel, iron, copper, and molybdenum, which gives them exceptional magnetic permeability and high saturation flux density. Mumetal cores are commonly used in sensitive electronic devices such as transformers, sensors, and current transformers to minimize the effects of stray magnetic fields. Find additional info at https://www.transmartcore.com/products-4713.
On the one hand, it can isolate eddy current, and the data is suitable for higher frequencies; On the other hand, due to the gap effect between particles, the data has low permeability and constant permeability; Because the particle size is small, there is basically no skin phenomenon, and the change of permeability with frequency is relatively stable; Moreover, the powder core can be prepared into special-shaped parts of various shapes for different fields; Finally, the damaged strip in industry can be crushed into magnetic powder, and then made into magnetic powder core, which can reduce the loss and improve the use value of data. The magnetoelectric properties of magnetic particle core mainly depend on the permeability of powder material, size and shape of powder, filling coefficient, content of insulating medium, forming pressure and heat treatment process.
However, at the same BM, the loss of Fe based amorphous alloy is smaller than that of 0.23mm thick 3% silicon steel. It is generally believed that the reason for low loss is the thin thickness and high resistivity of iron-based amorphous alloy strip. This is only one aspect. The main reason is that the iron-based amorphous alloy is amorphous, the atomic arrangement is random, there is no magnetocrystalline anisotropy caused by atomic directional arrangement, and there is no grain boundary causing local deformation and composition offset. Therefore, the energy barrier hindering domain wall motion and magnetic moment rotation is very small, with unprecedented soft magnetism, so it has high permeability, low coercivity and low loss.
Silicon steel is a traditional magnetic material mainly for 50Hz to 1000Hz electronic and electrical applications. The toroidal core is one of the main products of Transmart Industrial. Our silicon steel core series has many styles to meet the diversified needs of customers. We manufacture various type of cores in silicon steels, such as Current Sensor Cores, silicon steel transformer core, Instrument Transformer Cores, Torodal cores, C-cores, Unicore etc. Transmart Industrial carries out strict quality monitoring and cost control on each production link of toroidal core, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the product has better quality and more favorable price than other products in the industry.
Hysteresis loss is the iron loss caused by the hysteresis phenomenon in the magnetization process of the iron core. The size of this loss is directly proportional to the area surrounded by the hysteresis loop of the material. The hysteresis loop of silicon steel is narrow, and the hysteresis loss of transformer core made of silicon steel is small, which can greatly reduce its heating degree. Since silicon steel has the above advantages, why not use the whole silicon steel as the iron core and process it into a sheet? rolled silicon steel sheet is selected. It is cut into long pieces according to the size of the required iron core, and then overlapped into “day” shape or “mouth” shape. In principle, in order to reduce eddy current, the thinner the silicon steel sheet, the narrower the spliced strip, and the better the effect. This not only reduces the eddy current loss and temperature rise, but also saves the material of silicon steel sheet. But in fact, when making silicon steel sheet iron core. Not only from the above favorable factors, because making the iron core in that way will greatly increase the working hours and reduce the effective section of the iron core. Therefore, when making transformer iron core with silicon steel sheet, we should start from the specific situation, weigh the advantages and disadvantages and choose the best size. See even more information at https://www.transmartcore.com/.
The transformer is made according to the principle of electromagnetic induction Two windings, a primary winding and a secondary winding, are wound around the closed iron core column When AC power supply voltage is applied to the primary winding There is alternating current in the original Rao group, and the magnetic potential is established. Under the action of the magnetic potential, the alternating main flux is generated in the iron core. The main flux passes through the iron core at the same time, AC link the primary and secondary windings are closed, and the induced electromotive force is generated in the primary and secondary windings respectively due to the action of electromagnetic induction.